feeding bales with multiplus silage wagon

Giltrap MultiPlus Feeders

Giltrap Multiplus Feeders

Whether it’s chopped bulk silage, square bales, chopped round bales, fodder beet or pretty much anything else you have, you can rest assured that a Giltrap MultiPlus Feeder will get the job done efficiently. Giltrap Engineering has been manufacturing feed out equipment for over 50 years, with their long history of manufacturing top quality New Zealand made equipment and their commitment to continuous improvement, the Giltrap MultiPlus feeders are at the top of their game.

KEY FEATURES

Can feed out both sides & into troughs.
Rate control on the cross-floor chain with elevator load sensing valve for an evenly controlled feed rate
High sides are standard for stacking two layers of square bales.
Hydraulic tilting elevator on right hand side with concertina anti-spillage plate
Chain and slat transfer floor allows the load to be reversed.
LED lights
Heavy duty tandem axles with remote greasing points
Stainless steel chain tensioning adjusters are easy to access and won’t rust.
Quick release gate on the rear eliminates damage if the load is reversed by accident. The gate swings fully open to load bales through the rear
Rope rails run the full length of the body to tie bale twine on to. The twine strips off the bale as the load moves forward.
Zinc plated steel concertina plates reduce spillage from the folding elevator.
Combined Hardox450® and Strenx700® tub body for unmatched structural strength and toughness
Both the main floor and cross conveyor are driven by high torque rated hydraulically driven reduction gearboxes
Available in 13m3, 16m3 and 19m3

Options

Joystick electric control for all three functions
Hydraulic Brakes
Visibility kit
Electronic weighing system with wireless display
An optional rotor kit can be fitted in place of the cross-floor gate. This shreds bales for a more even feed row.

View other feedout wagons here.